8
9
IR Remote Control
Model: KDRMSWPROK (uses CR2025 battery). Please note that some remote buttons may have no
functionality.
Discreet
Input Select
Incremental
Input Select
R1, R2, R3
(Reserved)
Device Select
(used for
addressing
mode)
Auto
Switching
Toggle
Discreet Power
On and Off
Auto Switching Mode
›
When enabled, a newly detected active source is automatically selected.
›
If current source is disconnected or becomes inactive, switch sequentially advances to an active
input/source.
›
Manual source selection via push-button, IR, or RS-232 is still possible when enabled.
›
Auto Switching mode is only disabled via IR or RS-232. It is not disabled via manual source
switching/selection.
RS-232 Commands & Protocol
KD-S2x1X-2 / KD-S4x1X-2 allow control over serial interface for bi-directional communication.
Use the included 3.5mm TRS to Micro USB cable to control from your control system or BrightSign player.
Connection Protocol:
›
Baud Rate = 57,600 bits per second
›
Data Bits = 8, Stop Bits = 1
›
Parity = Non, Flow Control = None
›
Carriage Return: Required at end of string
Notes:
›
Commands are not case-sensitive
›
Spaces are shown for clarity; commands should NOT have any spaces
›
After a new command is received, a prompt should be sent back
KD-S2x1X-2 Help Command (H). Returns entire API in readable format:
KD-S2x1X-2> H
-------------------------------------------------------------------------
-- Key Digital Systems HELP --
-------------------------------------------------------------------------
-- KD-S2x1X-2 F/W Version : 1.01 --
-- --
-- H : Help --
-- STA : Show Global System Status --
-- --
-- Video Output Setup Commands: yy = [01-02,U,D] --
-- SPO SI yy : Set Output to Video Input yy --
-- SPO01 SI yy : Set Output to Video Input yy --
-- --
-- System Control Setup Commands: --
-- SPC AS x : Set Auto Sensing Mode x = [0=OFF,1=ON] --
-- SPC FB E/D : Enable/Disable Front Input Select Button --
-- --
-------------------------------------------------------------------------
KD-S2x1X-2 Status Command (STA). Returns unit status and settings in readable format:
KD-S2x1X-2> STA
-------------------------------------------------------------------------
-- Key Digital Systems STATUS --
-------------------------------------------------------------------------
-- KD-S2x1X-2 F/W Version : 1.01 --
-- --
-- Front Input Select Button : Enabled --
-- Auto Sensing Mode : OFF
--
-- --
-- Video Input 01 : EDID = DEFAULT A, LINK = ON --
-- Video Input 02 : EDID = DEFAULT A, LINK = OFF --
-- --
-- Video Output : Input = 01, LINK = ON , HPD = OFF --
-- --
-------------------------------------------------------------------------
