Page 2
Here is a complete list of all items required to send IR through the KD-MSWCAT8X8/4X4.
(Items listed are for a single connection).
Product
Qty. Description
Use
1
3.5mm male mono
jack to RCA female
adapter
Converts IR Distribution output to
RCA to connect to Baluns
2
KD-VACBL 5 RCA
breakout cable
Breaks out 15 pin to 5 separate
female RCA connections
1
Single male RCA to
male RCA
Carries IR signal to input of
breakout cable
1
RCA male to 3.5mm
mono female adapter
Converts IR output of Balun to
allow standard emitter to plug in
1
15 pin VGA female to
female adapter
If using KD-CVARX Baluns for 5
RCA breakout cable to fit
1
Standard IR emitter
To send IR to device you wish to
control
Audio Connections
The KD-MSWCAT4x4 / 8x8 has Two (2) 3.5mm audio input connections for each video input. For
standard Analog Stereo sources, utilize the left input. For Digital PCM sources utilize the right input.
For Balanced Analog sources, utilize both inputs. Pin outs for these connections are shown below.
