10
11
-- Audio DSP Setup Command ( xx=[01~08,A] A=All ) --
-- SPOxx AV yy : Set Output xx Audio Volume to yy, yy=[00-99],U,D--
-- SPOxx AB yy : Set Output xx Audio Balance to yy, yy=[00-40],U,D--
-- SPOxx AL yy : Set Output xx Audio Bass Gain to yy, yy=[00-24],U,D--
-- SPOxx AM yy : Set Output xx Audio Middle Gain to yy, yy=[00-24],U,D--
-- SPOxx AH yy : Set Output xx Audio Treble Gain to yy, yy=[00-24],U,D--
-- SPOxx AD yy : Set Output xx Audio Delay to yy, yy=[00-99],U,D--
-- SPOxx A E/D/T : Set Output xx Audio Mute Enabled/Disabled/Toggle --
-- --
-- Network Setup Command ( xxx=[000-255], zzzz=[0001~9999] ) --
-- SPCETIPA xxx.xxx.xxx.xxx : Set Host IP Address to xxx.xxx.xxx.xxx --
-- SPCETIPM xxx.xxx.xxx.xxx : Set Net Mask to xxx.xxx.xxx.xxx --
-- SPCETIPR xxx.xxx.xxx.xxx : Set Route IP Address to xxx.xxx.xxx.xxx --
-- SPCETIPP zzzz : Set TCP/IP Port to zzzz --
-- SPCETIPB : Apply New Network Config --
-- --
-- System Control Setup Command ( xx=[01-99], z=[0-4] ) --
-- SPC NI xx : Set Number of Inputs for Expansion Matrix Switch --
-- SPC NO xx : Set Number of Ouptus for Expansion Matrix Switch --
-- SPC EX xx : Set Unit Number for Expansion Matrix Switch --
-- SPCFB E/D : Set Front Panel Button E/D (E=Enable,D=Disable) --
-- SPC RSB z : Set RS232 Baud Rate to z bps --
-- [0:57600, 1:38400, 2:19200, 3:9600, 4:4800] --
-- SPCDF : Reset to Factory Default All --
-- --
-- System Address Setup Command ( xx = [00-99], 00 = Single ) --
-- SPCAxx : Set System Address to xx --
-------------------------------------------------------------------------
Status Command (STA)
– Returns unit and system status in readable format:
KD-MAX8x8> STA
-------------------------------------------------------------------------
-- Key Digital Systems STATUS --
-------------------------------------------------------------------------
-- KD-MAX8x8 System Address = 00 F/W Version : 1.0 --
-- --
-- Expansion Matrix Switch : Input = 08, Output = 08, Unit Number = 0 --
-- --
-- RS232 : Baud Rate=057600bps, Data=8bit, Parity=None, Stop=1bit --
-- Front Panel Button : Enabled
--
-- --
-- Network Setting(Telnet Server) Status --
-- MAC Address = 60:89:B1:14:00:02 --
-- Host IP Address = 192.168.001.239 --
-- Net Mask = 255.255.000.000 --
-- Router IP Address = 192.168.001.001 --
-- TCP port = 23 --
-- --
-- Audio Input Status --
-- 01: Analog Input = Unbalanced L+/R+ --
-- 02: Analog Input = Unbalanced L+/R+ --
-- 03: Analog Input = Unbalanced L+/R+ --
-- 04: Analog Input = Unbalanced L+/R+ --
-- 05: Analog Input = Unbalanced L+/R+ --
-- 06: Analog Input = Unbalanced L+/R+ --
-- 07: Analog Input = Unbalanced L+/R+ --
-- 08: Analog Input = Unbalanced L+/R+ --
-- --
-- Audio Output Status --
-- 01 : Analog Out = Analog In 03, PCM Out = PCM In 03 --
-- V=99, B=20, L=18, M=12, T=12, LP=33, Mute=ON , Out=Enabled --
-- 02 : Analog Out = PCM In 07, PCM Out = PCM In 07 --
-- V=99, B=20, L=18, M=10, T=16, LP=00, Mute=ON , Out=Enabled --
-- 03 : Analog Out = Analog In 05, PCM Out = PCM In 05 --
-- V=99, B=20, L=12, M=12, T=12, LP=40, Mute=ON , Out=Enabled --
-- 04 : Analog Out = Analog In 01, PCM Out = PCM In 01 --
-- V=99, B=23, L=12, M=12, T=12, LP=00, Mute=ON , Out=Enabled --
-- 05 : Analog Out = Analog In 08, PCM Out = PCM In 08 --
-- V=99, B=20, L=10, M=12, T=12, LP=00, Mute=ON , Out=Enabled --
-- 06 : Analog Out = Analog In 07, PCM Out = PCM In 07 --
-- V=99, B=20, L=12, M=12, T=12, LP=00, Mute=ON , Out=Enabled --
-- 07 : Analog Out = Analog In 02, PCM Out = PCM In 02 --
-- V=99, B=20, L=12, M=12, T=12, LP=00, Mute=ON , Out=Enabled --
-- 08 : Analog Out = Analog In 08, PCM Out = PCM In 08 --
-- V=99, B=20, L=12, M=10, T=12, LP=03, Mute=ON , Out=Enabled --
-------------------------------------------------------------------------
KD-MAX8x8 Manual.indd 10-11
12/23/17 2:18 AM
