background image

521 East 3rd Street, Mount Vernon, NY 10553       
Phone 

::

 914.667.9700      Fax 

::

 914.668.8666

Web 

::

 www.keydigital.com      

KD-MSA8X8 Operating Instructions

Key Digital

®

, led by digital video pioneer Mike Tsinberg, 

develops and manufactures high quality, cutting-edge 
technology solutions for virtually all applications where 
high quality video imaging is important. Key Digital

®

  

is at the forefront of the video industry for Home 
Theater Retailers, Custom Installers, System Integrators, 
Broadcasters, Manufacturers, and Consumers. We 
provide total video system solutions because we 
know and help drive the technology, the industry, the 
business, and all the latest up-and-coming standards. 
But most of all, we know exactly what you need for your 
unique application - the right solution.

Rev 0 – Sept. 2007

The KD-MSA8X8 is a full matrix audio switcher capable of integrating up to 8 inputs or 
sources with 8 outputs or zones.  The unit directly accepts analog and PCM digital audio 
signals and is capable of switching all popular encoded (AC3, DTS etc.) signals as well.

 Operating Instructions

KD-MSA

8

X

8

Audio Matrix Switcher capable of switching up to  

8 L/R/Digital PCM Audio Sources/Inputs to  

8 independent Zones/Outputs

KD-MSA8x8_Manual.indd   2-1

9/4/07   12:22:25 PM

Summary of Contents for FatBOY KD-MSA8X8









Reviews: