Page 14
Page 15
Specifications
Technical:
»
Input (Each):
1 HDMI; 1 wired IR on 3.5 mm stereo jack connector per slot
»
Output (Each):
1 HDMI; 2 CAT5e/6 on RJ45 connectors;
»
Bandwidth:
TMDS bandwidth 10.2 Gb/s
»
Control:
Front panel push buttons and LED’s; IR sensor front/rear; RS-232 Tx/Rx lines with
full bi-directional operation
»
Video/Audio Matrix Switching:
Full matrix switching for HDMI Video matrix
»
Wired IR Control Matrix:
Each input/output section wired IR and unit wired IR can be
switched into matrix in uni-directional operation to any of the inputs/outputs
»
EQ adjustment:
Precise auto-adjustment, distance measurement on Rx Balun
or CAT5e/6 Input.
»
Link and Range:
1080p/60, 1920x1200 max. up to 75 ft. 1080i/60, 720p,
1080p/24 up to 100 ft.
»
Deep Color Support:
Digital video formats in Deep Color Mode at up to 10 bits/color
»
HDMI
®
and HDCP Licensing:
Fully licensed and compatible with all HDMI
and HDCP technologies
»
EDID Control:
Each input EDID is either a choice of any of the active zone displays
connected via HDMI or CAT5e/6 to the outputs or form internal library of
9 default EDID’s
»
DDC Signal (Data):
Input DDC Signal: 5 Volts p-p (TTL)
»
HDMI Video/Audio Signal:
Input Video Signal: 1.2 Volts p-p
»
DDC Communication:
EDID and HDCP Bi-directional Transparency from Display to Source
»
Wired IR:
modulated IR signal input, 0-5V TTL or -10to +10V.
»
Power:
External Power Supply. 12V/2A
General:
»
Regulation:
CE, FCC, RoHS, WEEE
»
Rack Mount:
1U, Full Rack Width (rack ears included)
»
Enclosure:
Black Metal
»
KD-4x4XC Product Dimensions:
17.125” W x 5.50” D x 1.75” H
»
KD-CATHD4x4Rx Product Dimensions:
3.25” W x 1.875” D x .875” H
»
KD-4x4XC Product Weight:
4.05 lb.
»
KD-CATHD4x4Rx Product Weight:
.25 lb
»
Shipping Weight:
10 lb
Important Product Warnings:
1.
Connect all cables before providing power to the unit.
2.
Test for proper operation before securing unit behind walls or in hard to access spaces.
3.
If installing the unit into wall or mounting bracket into sheet-rock, provide proper screw support
with bolts or sheet-rock anchors.
Safety Instructions.
Please be sure to follow these instructions for safe operation of your unit.
1.
Read and follow all instructions.
2.
Heed all warnings.
3.
Do not use this device near water.
4.
Clean only with dry cloth.
5.
Install in accordance with the manufacturer’s instructions.
6.
Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
7.
Only use attachments/accessories specified by the manufacturer.
8.
Refer all servicing to qualified service personnel. Servicing is required when the device has
been damaged in any way including:
»
Damage to the power supply or power plug
»
Exposure to rain or moisture
You MUST use the Power Supply provided with your unit or you VOID
the Key Digital
®
Warranty and risk damage to your unit and associated equipment.
