page 2
Kewaunee 4-Leg Table — Assembly Instructions 05/20
page 3
Kewaunee 4-Leg Table — Assembly Instructions 05/20
Parts Identification
!
WARNING:
Before beginning assembly, read the entire instuction proceedure.
NOTE:
If installing shelf assembly on top of table, follow instructions on page 4 before
beginning assembly of table.
Step 3
Attach Stabilizing Spreader Rail & Adjust Leg Height
Step 2
Attach Modesty Panel
Right Hand
Leg Assembly
Left Hand
Leg Assembly
Modesty Panel
Stabilizing Spreader Rail
Front Apron Rail
(attached to work top)
Rear Apron Rail
(attached to work top)
Cabinet Hanging Rail
(attached to work top)
Work Top
Assembly Instructions
Step 1
Attach Legs
Assembly Instructions
(continued)
1a.
Attach
Leg Assemblies
to
Front
&
Rear Apron
Rails
using 1/4"-20 x 1" Flanged Cap Screws
Flange Nuts
Flanged Cap Screws
5/16"-18
Flanged
Cap
Screws
3a.
Remove 5/16”-18 x 5/8” Flanged Cap Screws from
Rear Adjustable
Leg Inserts.
(Two per leg)
3b.
Adjust
Leg Inserts
to desired
length and reinstall 5/16”-18
x 5/8” Flanged Cap Screws
through holes in Stabilizing
Spreader Rail.
(4 total)
3c.
Repeat process with
Front Adjustable Leg
Inserts
, omitting the
Stabilizing Spreader Rail
.
(make sure all Cap Screws
are securely tightened)
Front Adjustable
Leg Inserts
Rear Adjustable
Leg Inserts
Stabilizing
Spreader Rail
5/16"-18
Flanged
Cap
Screws
2a.
Loosely install a 1/4"-20 x 1" Flanged Cap Screw
in Flange Nut closest to
Rear Apron Rail
on
each
Leg Assembly
2b.
Slide notch in Modesty Panel over Cap Screw
2c.
Install second 1/4"-20 x 1” Flanged Cap Screw
in each Leg Assembly and tighten both Cap
Screws
Flange
Nuts
Flanged
Cap Screws
Modesty Panel
Notch
