10
11
INITIAL CLEANSING & FIRST BREW
3.
Lift the Cold Water Reservoir Lid.
For accurate measuring, do not fill if the
Handle is up. In the down position it
prevents water from entering the lower
heating compartment.
4.
Pour water anywhere within the Cold
Water Reservoir until it reaches up to
the rim of your desired fill level on the
Water Level Guide (minimum of 6 oz.).
Lower the lid.
For accurate measuring,
do not fill if the Handle is up. Bottled or
filtered water is recommended; distilled
or reverse osmosis water is not.
5.
Lift the Handle. Water starts to drain
from the Cold Water Reservoir into the
brewer.
If you add more than 10 oz.,
excess water goes into the Drip Tray.
6.
Let water fully drain into brewer before
lowering the Handle. Place mug on the
Drip Tray.
If you want to use a taller mug,
you can slide the Drip Tray out.
7.
Insert the K-Cup® pod into the K-Cup®
Pod Holder.
Do not add a K-Cup® pod if
you are performing the initial cleansing
brew. DO NOT remove foil lid or puncture
K-Cup® pod.
1 | LET’S GET BREWING!
MAX
10 oz.
8 oz.
6 oz.
MIN
2.
Press the Power Button. The Add Water
Indicator will flash blue.
The Power
Button Does not illuminate.
1.
Remove all tape and cardboard. Plug
the Power Cord into an independent,
grounded outlet.
Preform an initial
cleansing brew before making your first
beverage. Follow these instructions but
do not insert a K-Cup® pod.
