Over Ice
10 oz
6oz
8oz
4oz
1
2
3
12oz
STRE
NGTH
TEMP
Remove packing tape from coffee
maker. Plug into a grounded outlet.
Place a large mug (296 ml/10 oz) on
the drip tray.
NOTE:
If changing water tank position to the back,
please complete before first brew (refer to instructions
included).
Remove the water reservoir lid, then
lift the reservoir straight up to remove
it. If you have a Keurig
®
Water Filter,
install it now. Refer to your Water
Filter Starter Kit for instructions.
Rinse reservoir with fresh water and
fill to the
MAX FILL
line.
Replace water reservoir, making sure
the lock tabs engage with the coffee
maker. Replace lid.
NOTE:
Do not use distilled water.
Lift and lower the handle.
Do not
insert a K-Cup® pod.
The coffee
maker will power on automatically.
The 4 cup sizes will blink. Press the
8oz
button, then press the blinking
BREW
button to start a cleansing brew. Pour
the hot water into the sink.
The one-time setup process is now
complete and you are ready to brew!
1
3
5
2
4
6
Before You Brew
Place a mug on the drip tray. If using a
travel mug, remove the drip tray and
place the mug on the drip tray base.
Lift the handle and place a K-Cup® pod
in the K-Cup® pod holder. Lower the
handle completely to close the lid.
Do not remove the foil lid on the
K-Cup® pod.
The 4 brew size buttons will blink.
Select your brew size, then press the
blinking
BREW
button. For a stronger
coffee, press the
STRONG
button
before brewing. The
BREW
button
will remain illuminated while brewing.
Brewing is complete when the buttons
are no longer illuminated. Lift the
handle and dispose of the K-Cup
®
pod.
CAUTION:
While brewing, there is extremely hot water
in the K-Cup® pod holder. To avoid injury, do not lift the
handle during the brewing process.
6
oz
8
oz
10
oz
12
oz
ST
RO
NG
OVER
IC
E
6
oz
8
oz
10
oz
12
oz
ST
RO
NG
OVER
IC
E
Plug & Place
Rinse & Fill
Lift & Lower
Cleansing Brew
Place Mug & Pod
Brew & Enjoy!
Coffee Maker Features
Smart Start
heats then brews in one simple process. No need
to wait for the coffee maker to heat before selecting brew size.
Simply power on your coffee maker by lifting the handle, add a
K-Cup
®
pod, select your brew size, then press the
BREW
button.
The coffee maker will heat, then automatically begin brewing.
Auto Off
automatically turns your coffee maker off 5 minutes
after the last brew for energy savings.
High Altitude
To ensure your coffee maker works properly at
higher altitudes (1,500 metres/5,000 feet) please enable the
High Altitude Brewing Mode on your coffee maker.
1.
Power the coffee maker off while it is plugged in.
2.
Press and hold the
BREW
and
8 oz
buttons for 3 seconds. The
12 oz button will illuminate to confirm that the High Altitude
Brewing Mode has been enabled.
Strong Brew
for a bolder, more intense cup.
Over Ice
brew your favourite beverages over ice.
Brew Your First Cup
For bolder coffee
press the
STRONG
button,
followed by the
BREW
button.
For iced beverages
fill a large plastic tumbler with
ice. Insert any K-Cup® pod, then press the
OVER
ICE
button, followed by the
BREW
button.
NOTE:
Choose a tumbler large enough to accommodate both the ice and
dispensed liquid to prevent overflow.
Multi-position Water Reservoir
Position along the left or back of the coffee maker
to optimize counter space.
ATTENTION!
This coffee maker is only compatible with the newly designed
Keurig® My K-Cup® Universal Reusable Coffee Filter.
Do not attempt to use any other reusable filter or
previous versions of Keurig® My K-Cup® Universal
Reusable Coffee Filter; may cause damage
to coffee maker.
Power Button
Brew Button
Brew Button
1