MY20K10-02_1.0_10.11.2020
36
Operation
6.5
Instruction and customer service
Your supplying specialist dealer will provide
customer service. Contact details can be found on
the S pedelec pass for these operating
instructions. The specialist dealer will explain all
the S pedelec functions to you in person, this
being when the specialist dealer hands over the
S pedelec at the latest. These operating
instructions are provided to you with every
S pedelec, so that you can consult them at a later
stage.
Your specialist dealer will also be happy to assist
you in the future whether you require
maintenance, conversion or repair.
6.6
Adjusting the S pedelec
Only a correctly adjusted S pedelec will guarantee
the desired ride comfort and health-promoting
activity. Therefore adjust the
saddle
, the
handlebars and the suspension
to your body and
your preferred riding style before the first ride.
6.6.1
Adjusting the saddle
6.6.1.1 Adjusting the saddle tilt
The saddle tilt must be adjusted to the seat height,
the saddle and handlebar position, and the saddle
shape to ensure an optimum fit. The seating
position can be optimised in this way if needed.
First, readjust the saddle after finding the
handlebar position you prefer.
Place the saddle tilt in the horizontal position to
adjust the S pedelec to your needs for initial
use.
Figure 22: Horizontal saddle tilt
6.6.1.2 Determining the seat height
To determine the seat height safely, either push
the S pedelec near to a wall, so that you can lean
on the wall to support yourself or ask another
person to hold the S pedelec for you.
1
Climb onto the S pedelec.
2
Place your heel on the pedal and extend your
leg, so that the pedal is at the lowest crank
rotation point.
The rider sits straight on the saddle if the seat
is at an optimum height. If this is not the case,
you can adjust the length of the seat post to
your needs.
Figure 23: Optimal saddle height
Crash caused by incorrectly adjusted torques
If a screw is fastened too tightly, it may break. If a
screw is not fastened enough, it may loosen. This
will cause a crash with injuries.
Always observe the indicated torques on the
screw or in the
operating instructions
.
CAUTION
!
