Kettler MONDEO Assembly Manual Download Page 2

Handling the equipment

■ 

Before using the equipment for exercise, check carefully to en-
sure that it has been correctly assembled.

■ 

Before beginning your first training session, familiarize yourself
thoroughly with all the functions and settings of the unit.

■ 

It is not recommended to use or store the apparatus in a damp
room as this may cause it to rust. 

Please ensure that no part of

the machine comes in contact with liquids (drinks, perspiration
etc.). This may cause corrosion.

■ 

The machine is designed for use by adults and children should
not be allowed to play with it. Children at play behave unpre-
dictably and dangerous situations may occur for which the ma-
nufacturer cannot be held liable. If, in spite of this, children are
allowed to use the equipment, ensure that they are instructed in
its proper use and supervised accordingly.

■ 

The crosstrainer complies with the DIN EN 957-1/-9, class HB.
It is therefore unsuitable for therapeutic use.

■ 

A slight production of noise at the bearing of the centrifugal
mass is due to the construction and has no negative effect upon
operation. Possibly occurring noise during reverse pedalling re-
sult from engineering and are absolutely safe.

■ 

Do not use corrosive or abrasive materials to clean the equip-
ment. Ensure that such materials are not allowed to pollute the
environment.

■ 

The crosstrainer has a magnetic brake system.

■ 

To operate correctly, the pulse function requires a minimum vol-
tage of 2,7 volts (only for computers working with batteries).

■ 

The equipment is dependent of revolutions per minute.

■ 

Please ensure that liquids or perspiration never enter the ma-
chine or the electronics.

■ 

Before use, always check all screws and plug-in connections as
well as respective safety devices fit correctly.

■ 

Always wear suitable shoes when using.

■ 

All electric appliances emit electromagnetic radiation when in
operation. Please do not leave especially radiation-intensive
appliances (e.g. mobile telephones) directly next to the cockpit
or the electronic controlsystem as otherwise values displayed
might be distorted (e.g. pulse measurement).

Instructions for Assembly

■ 

Ensure that you have received all the parts required (see check
list) and that they are undamaged. Should you have any cause
for complaint, please contact KETTLER Parts and Service Dept.

■ 

Before assembling the equipment, study the drawings carefully
and carry out the operations in the order shown by the dia-
grams. The correct sequence is given in capital letters.

■ 

The equipment must be assembled with due care by an adult
person. If in doubt call upon the help of a second person, if
possible technically talented.

■ 

Please note that there is 

always

a danger of injury when wor-

king with tools or doing manual work. Therefore please be ca-
reful when assembling this machine.

■ 

Ensure that your working area is free of possible sources of
danger, for example don’t leave any tools lying around. Al-
ways dispose packaging material in such a way that it may not
cause any danger. There is always a 

risk of suffocation

if child-

ren play with plastic bags!

■ 

The fastening material required for each assembly step is sho-

2

Important Instructions

For Your Safety

■ 

The crosstrainer  should be used only for its intended purpose,
i.e. for physical exercise by adult persons.

■ 

Any other use of the equipment is prohibited and may be dan-
gerous. The manufacturer cannot be held liable for damage or
injury caused by improper use of the equipment.

■ 

The crosstrainer  has been designed in accordance with the la-
test standards of safety. Any features which may have been a
possible cause of injury have been avoided or made as safe as
possible.

■ 

Incorrect repairs and structural modifications (e.g. removal or
replacement of original parts) may endanger the safety of the
user.

■ 

Damaged components may endanger your safety or reduce the
lifetime of the equipment. For this reason, worn or damaged
parts should be replaced immediately and the equipment taken
out of use until this has been done. Use only original KETTLER
spare parts.

■ 

If the equipment is in regular use, check all its components

thoroughly every 1 -2 months. Pay particular attention to the
tightness of bolts and nuts. This is particularly true for the attach-
ment of grip strap and running plate.

■ 

To  ensure that the safety level is kept to the highest possible
standard, determined by its construction, this  product should
be serviced regulary (once a year) by specialist retailers.

■ 

Instruct persons using the equipment (in particular children) on
possible sources of danger during exercising.

■ 

Before beginning your program of exercise, consult your doc-
tor to ensure that you are fit enough to use the equipment. 

Base

your program of exercise on the advice given by your doctor.
Incorrect or excessive exercise may damage your health!

■ 

Any interference with parts of the product that are not descri-
bed within the manual may cause damage, or endanger the
person using this machine. Extensive repairs must only be car-
ried out by KETTLER service staff or qualified personnel trained
by KETTLER.

■ 

In case of enquiry, please contact your KETTLER dealer.

Please read these instructions carefully prior to carrying out assembly and using for the first time.
They contain information which is important for your safety as well as for the use and maintenan-
ce of the appliance. Keep these instructions in a safe place for reference purposes, maintenance
work and to assist you when ordering spare parts.

Summary of Contents for MONDEO













Reviews: