Important safety instructions
Important – Read carefully before use – Keep in
a safe place for later consultation!
– Assemble the cot carefully and regularly check that all
screw connections are tight so as to rule out injuries
from trapped laces, chains, etc.!
– This product may only be used for its intended purpose
as a cot.
– WARNING – Do not use the cot if parts are missing or
broken!
– Only those spare parts supplied by the manufacturer
may be used.
– WARNING – Never place the cot near a naked flame
or other strong source of heat such as an electric ra-
diant heater, gas-fired stove etc
– Please note that lowest position of the bed base is the
safest. As soon as your child is old enough to sit, kneel
or pull him/herself up you must use this lowest position
of the bed base!
– WARNING – Never leave objects in the bed that your
child could use to climb up the sides or which constitu-
te a risk of suffocation or strangulation!
– The cot is designed for mattresses of the size 140x70
cm. The mattress may not be thicker than 145 mm; this
ensures that the surmountable side height of 500 mm in
the highest position and 200 mm in the lowest position
is not fallen short of.
– WARNING – Never use more than one mattress in the
cot.
– Only clean the piece of furniture with mild, common de-
tergent and a moist, soft cloth. Remove any detergent
residues with lukewarm water. Leave the piece of furni-
ture to dry thoroughly before further use.
– If you leave your child unattended in the cot always
make sure that the removable slats are inserted correct-
ly.
– Always remove all removable slats if you want your
child to have free access to the cot.
– As soon as your child is able to climb out of the cot you
should dismantle the sides so as to avoid any falls.
– The product is 100% recyclable.
– Subject to design modifications
Assembly instructions:
– Caution: any marks on the screw heads have been cau-
sed by a trial assembly in the works. This is your gua-
rantee for top quality.
– Darkening: this furniture range has been made from so-
lid beech wood. The wood only achieves its final colour
after three to six months exposure to natural light.
– Do not use an electric (cordless) screwdriver for assem-
bly work!
– Only tighten all screws fully after complete assembly. In
other words, only tighten screws loosely at first so as to
avoid any stress.
GB
– Please note that there is always a danger of injury when
working with tools or doing manual work. Therefore
please be careful when assembling this machine.
– Ensure that your working area is free of possible sour-
ces of danger, for example don’t leave any tools lying
around. Always dispose packaging material in such a
way that it may not cause any danger. There is always
a risk of suffocation if children play with plastic bags!
– The equipment must be assembled with due care by an
adult person. If in doubt call upon the help of a second
person, if possible technically talented.
– The fastening material required for each assembly step
is shown in the diagram inset. Use the fastening mate-
rial exactly as instructed.
– For technical reasons, we reserve the right to carry out
preliminary assembly work (e.g. addition of tubing
plugs).
List of spare parts
When ordering spare parts, always state the full article
number, spare-partnumber, the quantity required and the
S/N of the product (see handling).
Example order: Art. no. H1796-9000 / 1 piece / spare-
part no. 98107554 / S/N ....................
Goods may only be returned after prior arrangement and
in (internal) packaging, which is safe for transportation, in
the original box if possible.
It is important to provide a detailed defect description / da-
mage report!
Important: spare part prices do not include fastening ma-
terial; if fastening material (bolts, nuts, washers etc.) is re-
quired, this should be clearly stated on the order by ad-
ding the words „with fastening material“.
3
