Kettler KB142-ZXRW, Translation Of The Original Operating Instructions

Page: 77 / 154

MY21K01 - 32_1.0_24.09.2020
77
Operation
6.11 Rechargeable battery

Switch off the battery and the drive system before
removing or inserting the battery.
6.11.1 Frame battery
Only applies to pedelecs with this equipment
6.11.1.1 Removing the frame battery
Figure 97: Removing and inserting the frame battery
1 Open battery lock with battery key (see [1]).
2 Tip the battery out of the top section of the
frame battery mount .
3 Pull battery from the frame battery mount
(see [2]).
6.11.1.2 Inserting the frame battery
1 Place the battery on the contacts in the lower
section of the
frame battery mount (see [3]).
2 Remove the battery key from the battery lock
(see (4)).
3 Tip the battery into the top section of the frame
battery mount until it will go no further.
 There is an audible clicking noise.
4 Check the battery to make sure it is firmly in
place.
6.11.2 Pannier rack battery
Only applies to pedelecs with this equipment
6.11.2.1 Removing the pannier rack battery
Figure 98: Removing (2) and inserting (3) the pannier rack
battery
1 Open battery lock with battery key (see [1]).
2 Pull the pannier rack battery backwards and
out of its
mount (see (2)).
3 Remove the battery key from the battery lock
(see (1)).
6.11.2.2 Inserting the pannier rack battery
1 Insert the pannier rack battery into its mount
with the contacts facing the front until it clicks
into place (see [3]).
2 Check the battery to make sure it is firmly in
place.
(2)
7°
(1)
(3)
(4)
(1)
(2)
(3)