21
6-7. Printer Output
Measured values can be printed out by using the optional printer
(VZ-390).The output content is "calibration curve number,"
"number of measurement times," "moisture value," and "average
moisture value."
(1) Set up
Press the
key in normal measurement mode. "P" will be
displayed to the right of "TIMES". The set up is complete.
* The timing for output is just after a measurement or just after the
display of an average value. However, there is no output if the
measured value is outside the measuring range.
* After setting up the printer (VZ-390, option), connect the printer cable
(VZC70, option). Please refer to the operating manual for the printer for
how to set up the printer.
(2) How to cancel the setting
Press the
key in normal measurement mode. "OFF" will
be displayed to the right of "TIMES". The setting is cancelled.
* The settings in both (1) and (2) will be retained in memory when the
power is turned off.
HK-300
CALIBRATION No.01
TIMES [%]
1
5.8
2
5.9
3
5.7
4
6.0
5
5.9
6
5.8
AVERAGE 5.9
<Printout example>
