EFX 1 Edit
https://www.ketron.it/images/ketron/Manuali_HTML/SD80/english/23_efx1_edit.html[12/05/2020 19:58:24]
EFX1 Edit
The display shows a number of effect footswitches, typically used by guitarists, and a guitar amplifier. Each pedal
effect may be enabled or disabled and the value of the effect may be modified. You can for example touch the knob
of the distortion effect to enable it (a red light on) or touch it again to disable it (red light off). You can vary the
distortion value by turning the distortion potentiometer with the Dial. Finally, if you touch the lower part of the
footswitch where a rectangular box is displayed, a pop up window opens with the distortion preset already
configured.
The Wha footswitch does not have virtual potentiometers for adjustment, and may only be enabled or disabled; it
does however have the rectangular box on which you may select the preconfigured presets (Mono Wha, Stereo Wha
etc..). The best application of the effect Wha is obviously obtained using an external footswitch for control.
Delay also has the Tap Delay option which synchronises the echo repetitions with the tempo of the Style or Midifile.
You can also turn the amplifier simulator on and off and has a rectangular box which opens a pop up window with
different amplifier models to select.
FACTORY RESTORE
: This function allow to restore original Factory Guitar Set Up when DSP is
enabled to Guitar On Mode .
Finally, the entire chain of effects may be excluded with the
BYPASS
key that you will find in the bottom right
hand corner of the display.
You can produce a new chain of effects and save them in a single preset (User).