Video
https://www.ketron.it/images/ketron/Manuali_HTML/SD80/english/52_video.html[12/05/2020 19:52:41]
Video
The
VGA MONITOR
and
DVI MONITOR
keys at the top of the display allow you to select the
monitor to connect to the instrument. If you change from VGA to DVI or vice versa remember that the system must
be rebooted to introduce the change; a dialogue box will therefore appear at the centre of the display asking you if
you wish to reboot the system (any changes that have not been saved will be lost if you switch off the instrument).
Lower down on the display you will find a table on which you may select the resolution of the external video. On the
right you may enable the
MIRROR
function that projects the display on the external screen, or disable it in
order to display only the song text.
-
CALIBRATE
:
Opens a window on which you may calibrate the Touch Screen display. Here again you
should reboot the system. If you select
Yes
the system will be switched off. Before the system switches off
completely, a cross will appear in the upper left hand corner of the display. Whenever you touch the cross it moves
to the other corners of the display and finally positions itself at the centre of the black display. At this point if you
touch the cross again, the system starts up and the display will recognise the touch of your fingers.
Info:
You should calibrate the instrument as described above whenever you update your system or if the display
no longer responds promptly when you touch it.
-
LOAD IMAGE
: Press this function to load a customised image on the instrument which you may use as a
preset background of the display.
-
FACTORY LOGO
: This function sets the factory logo as background of the display.
