7
Please visit www.kestrelinstruments.com/support/drop_support for more information.
Using Your Kestrel DROP
• As soon as the battery supplies power to the DROP, it begins logging data.
Battery life will depend on logging rate, amount of time connected to
Kestrel LiNK app and ambient temperature. The only way to stop a DROP
from logging is to remove the battery.
• The DROP will log at the default of once per hour unless the user changes
the logging rate with the Kestrel LiNK app.
• The DROP will continue logging until the memory is full or if “wrap log” is
enabled, it will log until the battery runs out.
• Status Button and LED functions: status button will promote a DROP to
the top of the devices list in the LiNK app. “Beacon Mode” on the app will
cause the LED to blink.
If Battery Is Inserted
Unit is on. (Only powers off if battery is removed)
Bluetooth is on.
DROP is logging data.
LED Condition
Status Button
Possible Conditions
Pressed
Unit is functioning normally.
Not Pressed
Battery was inserted.
Bluetooth has connected successfully.
Bluetooth has disconnected successfully.
Note: Status button can be used to immediately send a connection signal to your iOS/Android device.
LED Indicators
