21
Active – Setting a target to active makes it selectable
in the main target screen.(Not available in Sportsman
models)
TR – Target Range is the distance from the muzzle of the
rifle to the target.
DoF – Direction of fire is the direction from the position
of the shooter to the target.
Ideg – Inclination is the angle above or below horizontal
from the position of the shooter to the target.
Icos – Inclination Cosine is the cosine of the angle above
or below horizontal from the position of the shooter to
the target.
TS – Target Speed is the speed of the target
perpendicular to the direction of fire.
TD – Target Direction is the direction of travel of the
target perpendicular to the direction of fire.
WD – Wind Direction is the direction the wind is coming
from in relation to the direction of fire.
WS1 – Wind Speed 1 is a five second rolling average
wind speed.
WS2 – Wind Speed 2 is a five second rolling maximum
wind speed.
MV – Muzzle Velocity is the speed of the bullet as it leaves
the muzzle. MV can be measured with a chronograph or
calculated using the MV Cal function. An MV estimate is
often provided by cartridge manufacturers or in reloading
manuals.
DM – A Drag Model is the known aerodynamic drag profile
of a standard projectile against which an actual bullet is
referenced. Ballistics coefficients based on G1 drag models
are more widely available, ballistic coefficients based on
G7 drag models are more representative of a typical hollow
tip, boat tail bullet. (Applied Ballistics Custom Drag Models
– Using one of the Applied Ballistics custom drag models
replaces the use of a standard projectile drag model and it’s
associated BC. When a custom drag model is used, the BC
value appears as a 1. Applied Ballistics custom drag models
can only be used in Elite units.)
BC – A Ballistic Coefficient is a ratio that represents the ability
of the bullet to overcome air resistance and maintain velocity
while in flight in comparison to a standard projectile. Be sure
to match the G1/G7 drag model setting to the BC value you
are using. G1 BCs can not be used with G7 drag models and
vice-versa.
BW – Bullet Weight is the weight of the bullet measured in
grains or grams.
BD – Bullet Diameter is the diameter of the bullet measured
in inches or millimeters. (Note! Ensure bullet diameter is
correct. The given name of a bullet’s caliber does not always
match its actual diameter, for example 300WM is actually
.308”, not .300”)
TARGET MENU
GUN MENU
Shop for Quality products online at:
1.800.561.8187
www.
SCOUTBASECAMP
.ca
