support.kesslercrane.com
Page 11 of 14
USER GUIDE
SETTING UP A MOVE
SECOND SHOOTER PRO
PROGRAM MOVE
Select
PROGRAM MOVE
to set the 1st (begin) and 2nd (end) key frames for the move.
Be sure each axis is in the desired position before selecting
SE T 1ST KEY FRAME
or
SE T 2ND KEY FRAME
.
Position your Slider and Pan & Tilt head to desired beginning position and press ENTER
to
SE T 1ST KEY FRAME.
Position your Slider and Pan & Tilt head to desired end position and then press ENTER to
SE T 2ND KEY FRAME.
Creating 3 key frames functions similarly to the way you create 2 key frames.Keep in mind
that key frames are created consecutively, so
1ST KEY FRAME
is going to be the start
point,
2ND KEY FRAME
is a middle point, and
3RD KEY FRAME
is the end point.
Once all 3 key frames are created, you are prompted with a “2nd KF time” request— this
effectively sets the timing from
1ST KEY FRAME
to
2ND KEY FRAME
, and
2ND KEY
FRAME
to
3RD KEY FRAME
.
The lower the percentage entered, the faster the movement will be from
1ST KEY
FRAME
to
2ND KEY FRAME
and the slower the movement will be from
2ND KEY
FRAME
to
3RD KEY FRAME
.
2.
3.
1.