Kessil AP700 APP User Manual Download Page 2

Control

“Control Lamp” Interface

Step

1

   

Group Number

: Syncs and controls multiple lamps

   

WiFi SSID

: Unique code found on AP700

   

Lamp Status

: Indicates Manual Mode or Program Mode

   

Power

: Turns AP700 on/off

   

Find Me

: Flashes light to indicate location. 

* Press "Lamp Status" to control AP700.

Control Instructions

Step

2

Manual Mode 

   

1  Set Color (Full Spectrum).
2  Set Intensity (from 0% - 100%).
3  “Save Current Color” : Save your combination of Color & Intensity
                                        Combinations can be used in program mode.
4  "Use Saved Colors"
5  "Demo Effect" 

Storm    Cloud    Aurora  Rainbow

(Cannot change Color & Intensity while using demo effects)

C

D

E

B

A

Use Wireless Router

1  Make sure the AP700 WiFi indicator is flashing and press “Next”.
2  Exit App and open “Settings”> “Wi-Fi”, then connect to AP700 (WiFi 

SSID:Kessil_KDxxxxxxxx) (WiFi SSID Label can be found on AP700).

    

* Make sure it is connected and the WiFi fan signal at top right corner appear.

    Go back to the app and press “Next”

3 Select WiFi Network (Household/ Store) and enter Password. Press “Next”.
4 Exit app and open “Settings” > “Wi-Fi”, connect to the Wireless Router (Household/Store), 

then press “Next”.

    

* Make sure it is connected and the WiFi fan signal at top right corner appear.

5 If only connecting one AP700, press “Done”. 
   If connecting more than one AP700, press “Set Next Lamp”.

i   Repeat 1. and 2.
ii  Make sure the WiFi Network and password are correct.
iii Press “Next”.
iv Exit app and open “Settings” > “Wi-Fi”, connect to Wireless Router (Household/Store).

       * Make sure it is connected and the WiFi fan signal at top right corner appear.

v  Press “Next” and press “Done” if you have connected all AP700(s). Press “Set Next Lamp” 
and repeat steps if you have more to connect.

6 When prompted by “Search device again” pop-up, press “No” if you find all your lights on the screen. Press “Yes” if you do not.
7 Wait appox. 2 minutes for data to load and for lamp interface(s) to appear. The AP700(s) can now be controlled via app.
   If no new lamp interface, press                          at the top right corner. 

WiFi SSID : Kessil_KDxxxxxxxx

(WiFi SSID Label can be found on AP700)

2

Reviews: