Installation
42 /72
2017/11
010-657
Fix the chamber parts using connection wedges and assemble as follows:
• Use pliers to press both connecting surfaces together.
• Hammer the connecting wedges <7> in place and release the pliers
again.
• Then insert the sealing gasket for the next element and proceed as
described above.
3.12
Assembly (optional shortening) of the upper section:
• Insert the sealing gasket <22> or <4> into the cone <34> and grease it.
• Insert the upper cover section <20> or <2>, move it roughly to the required installation height, fix in place
using clamping rings.
• Use the adjustment screws to carry out fine adjustment to the final height.
LW
400
LW
800/1000
7
Fig. [20]
20
22
34
Fig. [21]
2
4
34
Fig. [22]