General
35 / 60
V 1.0
2 General
2.1
Introduction and welcome
Dear Customer,
We are delighted that you have decided to purchase one of our products. It is sure to satisfy your requirements
to the full. We wish you a problem-free and successful operation.
This document describes the installation and maintenance of the Aqualift F XL lifting station from KESSEL,
operated together with the control unit. The operating and maintenance manual for the control unit are part of
the station description.
In our efforts to maintain our quality standard at the highest possible level, we are naturally dependent on your
support. Please let us know any possible ways to improve our products.
Do you have any questions? We shall be glad to hear from you.
2.2
Product description, general
The KESSEL Aqualift F XL lifting station (hereafter referred to as Station) is designed for extracting wastewater
both with and without sewage. The wastewater container incorporates the pump(s) and the level sensor(s). The
assemblies are designed so that they can be easily attached to a KESSEL control unit. The station is supplied
in three different versions (volume capacities) and with different pumps. Depending on requirements, fittings
and shut-off valves made of plastic or grey cast iron can also be supplied.
2.2.1
Versions
The Station is produced in the following versions:
Pump / control unit connected values
Type designation
Container capacity
Mono
1
1)
One wastewater pump
Duo
2
2)
Two wastewater pumps, with identical power consumption
230 V
400 V
Aqualift F XL 200
200 litres
x
x
x
x
Aqualift F XL 300
300 litres
x
x
x
Aqualift F XL 450
450 litres
x
x
x
Summary of Contents for Aqualift F XL 200
Page 2: ...Inhalt V 1 0 2 60 1 Inhalt...
Page 27: ......
Page 34: ...ContendTable of contents V 1 0 34 60...
Page 57: ......