4. Dismount the two front screws and remove the frame (at the rear frame is just
hooked in)
5. Replace the runners
(Mark the old runner positions with a pen around the brackets first and place the new
ones accordingly)
6. Assemble the unit in reverse order. While installing the bottom frame make sure it’s
hooked-in at the rear side. Place the door-rail-unit on top of the four ClickFixx bolts and
move the door-unit against the bottom frame until the green bolts are locked
Kesseböhmer USA Inc. | 106 Market Street | Suite 300 | Wilmington, NC 28401 | 910-338-5080
[email protected] | www.cleverstorage.com
