KESSEBÖHMER
l
1
l
2
l
3
A
B
A
B
B
A
➊
HANDLING INFORMATION
Verso + Strato Wall Unit
3.1 The adjusting screw of the adapter plate has not been set correctly
➊
Insert a hexagon key (max. 4 mm) in the adjusting screw.
Adjust the adjusting screws on the left-hand and right-hand fittings
to improve the closing action.
The protrusion issue in figure
A
can be corrected by means of an
upwards adjustment and the protrusion issue in figure
B
by means of
a downwards adjustment.
3. Unit door is not aligned when closed
Once the furniture has been installed (or adjustment work has been performed on the front panels), the
front panels may not close cleanly. This could result in the front panels protruding at an angle as shown in
figures
A
and
B
.
Left-hand side
Right-hand side