KESNOS PD08A-18, User Manual

Page: 12 / 26

When the device is currently powered on, before any operation, only the
"POWER" button light will be on indicating the device is in "Standby" Status.
TIMER " " : If the timer is set up properly. the indicator light will be up,
flash if press TIMER button again to check and reset, and go out if non-
successful setup.
The lighting button " " : If the lighting function has been turned on, the light
will be on.
High-speed indicator light " " : If you set the unit to high speed fan mode.
the indicator will light up.
Low-speed indicator light " " :
If you set the unit to low speed fan mode.
the indicator will light up.
Dry clothes indicator light " " : When dry clothes mode is selected, it will be
on, otherwise it will be off.
Dehumidification light
" " : When the machine starts to dehumidify, the
indicator light will be on.
Continuous dehumidification light " " : When the continuous
dehumidification mode is selected, the light will be on.
Water full indicator light "
" : When the water tank is full, this indicator will
flash.
When the dehumidifier normally works, the "
52 " will show the current
humidity.
- 8 -
Auto Defrost Function
When the dehumidifier is running at a lower temperature, the system will
automatically determine whether there is a presence of frost. If any frost exists,
it will defrost automatically.
Defrost Action
The fan runs at high wind speed when the compressor stops, and the LED
screen displays the defrosting symbol.
When defrosting status. the power button " " will flash.
3. Display Status Description
o
o
o
o
o
o
OPERATION
INSTRUCTION S