Single-axis weed brush Weedo II
Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here.
DE
Before starting work
During operation
In dangerous situations
2019-03-01
22 / 79
WARNING
Risk of injury / risk of environmental damage due to non-compliance with
the safety measures!
Failure to observe the safety measures creates the risk of injury and damage to
the environment and property.
•
Before starting work, you must familiarize yourself with all facilities and
operating elements and their Function to be made familiar. The quick and
safe stopping of the engine in an emergency must be mastered.
•
It must be ensured that all protective devices are properly attached and in
the protective position. During workIt's too late for that!
•
The machine must be checked for operational safety before each start-up.
•
The hydraulic connections and hoses must be checked for leaks and
replaced if necessary.
•
The machine must never be defective or missingProtective devices are
operated.
•
The machine must be checked for operational safety before each start-up!
•
In addition to the information in these operating instructions, the generally
applicable safety and accident prevention regulations must also be
observeden.
WARNING
Risk of injury / risk of environmental damage due to non-compliance with
the safety measures!
Failure to observe the safety measures creates the risk of injury and damage to
the environment and property.
When starting the engine:
•
When starting the engine, all drives must be switched off.
•
The engine must not run in closed rooms.
•
Do not stand in front of the uniaxial weed brush to start the engine.
•
No jump-start fluids at loadingUse electrical jump starter (jump starter
cable). There is a risk of explosion!
During driving:
•
Never leave the operator station on the hand bar while driving.
•
Never adjust the hand rail while driving.
•
During the Do not make any adjustments to the attachment during
operation - risk of accident!
•
Caution with rotating tools - safety distance!
•
Beware of trailing tools. Wait before working on them until they come to a
complete standstill!
•
Located on driven partsthe pinch and shear points.
WARNING
Summary of Contents for Weedo II
Page 2: ...DE 2019 03 01 2 79...
