Montage - KM 11545; 13045; 15045 H-ARB/ M-ARB 45
12
Fig.3
Fig.4
6. Saw off the profile tube. Attention: the profile tube must be 10 mm longer
than the protection. (Fig. 3)
7. Repeat steps 4. - 6. on the second PTO shaft half.
8. Deburr all cut edges. (Fig. 4)
Fig.5
9. Grease the profile tubes (Fig.5)
10. Slide the profile tubes together.
Mount PTO shaft
1. Press and hold the locking pins on the outer forks.
2. Slide the outer fork onto the PTO stub shaft.
3. Release the locking pin.
4. Move the PTO shaft back and forth until the locking pin clicks into place.
Fig. 6
5. Hook the drive shaft safety chains to a fixed part on the tractor and the
implement. Fig.6)
Summary of Contents for KM 11545 H-ABR 45
Page 2: ...2...
Page 14: ...Montage KM 11545 13045 15045 H ARB M ARB 45 14...
