6
Safety instructions
3.2.2 Work and danger area
•
The user is responsible to third parties in the work area!
•
Staying in the danger area of the machine is prohibited!
•
Check the near range before starting up. Pay special attention to children and animals.
Ensure sufficient visibility!
•
Before starting work, remove foreign objects from the surface to be worked.
Pay attention to other foreign objects during work and eliminate them in good time.
•
When working in enclosed areas, the safety distance to the border must be maintained so as not
to damage the tool.
•
When working in the immediate vicinity of public roads and paths, these should not be
approached if possible, as there is a risk of injury to third parties due to flying objects.
•
When working on public roads and squares or in the immediate vicinity, warning and danger
signs should be set up in order to attract the attention of third parties.
3.2.3 Before starting work
•
Before starting work, please familiarize yourself with all the devices and actuators as well as their
function and make sure that all safety devices are properly installed and in the protective position!
It is too late during the work assignment!
•
Above all, learn how to stop the engine quickly and safely in an emergency
3.2.4 Starting the machine
•
When starting the motor, all drives must be switched off!
•
Do not run the engine indoors!
•
Do not step in front of the single-axle tractor or the implement to start the engine.
•
Do not use jumper fluids when using electric jump start (jumper cable). There is a danger of
explosion!
3.2.5 During operation
•
Never leave the operating position on the guide rail while driving!
•
Never adjust the operating handle while driving - risk of accident!
•
The transport of persons and objects is prohibited!
•
If, for example, the attachment has caught a foreign object and blocked it, stop the engine and
clean the attachment with a suitable tool! Always switch off the engine when handling or cleaning
the implement!
•
Do not leave the operating station until all tools of the attachment have come to a standstill!
•
In the event of damage to the self-propelled implement or attachment, stop the engine immediately
and have the damage repaired.
•
If the steering fails, stop the self-propelled implement immediately and stop the engine.
Have the fault rectified immediately.
•
If there is a risk of slipping on sloping ground, the implement carrier must be secured by an escort
with a pole or a rope. The escort must be located above the vehicle at a sufficient distance from
the work tools! For the helper, it is recommended to wear crampons.
•
If possible, always drive across (horizontally) to the slope!
•
Only drive on rough and dry ground on steep slopes! Moisture and rain increase the risk of slipping
out and slipping.
•
On steep slopes, lattice wheels or sprockets must be used to prevent the tractors from slipping
off.
•
In emergency situations, if, for example, the machine slips sideways in the slope, always release
the handles! You as an operator do not manage with their physical strength to prevent the
cultivators on slipping and are otherwise carried away.