8.
Your Kerrick Vacuum Cleaner is designed to
operate on 240 volt 50Hz, 1 phase power.
Switch on power point /switch on machine.
On 2 and 3 motor models, the suction power
can be adjusted by turning 1, 2 or 3 motors on
together or independently. It is important that
machine tanks be emptied regularly, preferably
after each use.
TO EMPTY AFTER DRY VACUUMING
9.
Detach head clamps (K), remove head, remove
cloth filter and support rings (J), shake clean
(9), using a stiff brush thoroughly clean the
cloth filter bag surface(10). Cloth filter should
be replaced at least every 12 months.
TO EMPTY AFTER WET VACUUMING
11.
Detach head clamps (K), remove head, wheel
tank to disposal area and tip fluid from tank.
On certain PHD tank models, tank emptying
can be quickly done using the tank drain hose.
12.
Dry tank thoroughly prior to re-assembly of
machine.
The underside of the motor head is fitted with a
float (H) which when wet vacuuming, prevents
the container overfilling. The float also prevents
the liquid from penetrating into the motor unit if
the machine should tip over. In order to keep the
machine in good operational condition the float
(H) must be cleaned at regular intervals. After wet
vacuuming, the tank, motor heads, and accessories
should be cleaned and wiped dry.
8
9
10
11
12
H
11
