AMLS3A102 INTERCOM SYSTEM SPECIFICATION Rev A JAN 2007
Page
4
of 4
OPERATING INSTRUCTIONS
Apply power - +12v to pin A and gnd to pin B of power input connector
Connect speaker 1 cable to speaker 1 connector on rear of panel.
Connect speaker 2 cable to speaker 2 connector on rear of panel
Mount speaker 1 on a fixed mount in the unit drum compartment. Mount it at a location
where noise from the drum compartment will be minimal.
Connect speaker 2 to the cable reel.
Place speaker 2 near work area. The speaker will pickup sounds from the work area
and broadcast them from the intercom.
Use the speaker 1 / 2 switch on the front of the panel to select which speaker to listen
and transmit to.
Use the internal volume control to adjust the volume of the intercom. This control only
affects the intercom volume, not the external speaker.
Use the external volume control to adjust the sound level at the external speaker.
To transmit sounds from the intercom to the external speaker, the push to talk button
must be depressed.