Kero-Sun KSC-960A, Instruction Manual

Page: 25 / 28

25
ΕΛΛΗΝΙΚΑ
• To operate the oscillation function, turn the OSC button. And select LOW or
HIGH heating.
• Unplug the heater when not in use.
Important Safeguards
Do not install the unit directly under a power outlet. Do not share the power outlet
with other appliances. Do not use an adapter or extension cord.
Unplug the unit when not in use for a prolonged period
Maintenance
Unplug and repair the unit when it is completely cool.
Please use soft cloth to clean the main body of heater. In case the surface
of heater is seriously de
fi led, please soak cloth in warm water or mild/neutral
detergent before cleaning the heater. In this way, the dirt is easy to clean. If mild
or neutral detergent is used. Please use the dry cloth to wipe the heater after
cleaning it with wet cloth.
Please do not apply dilution, gasoline, alcohol, kerosene, benzene, polishing
powder, alkali detergent, rough hair brush to the paint coat or resin surface or
any other material which might cause damage or deterioration of such surface.
It does not submerge it in water.
Keeps the unit dry completely before using it.
Storage
Store the heater in a cool, dry place when not in use. It is preferable to use the
packaging and the
original box to prevent accumulation with dust and dirt.
Troubleshooting
HEATER DOES NOT WORK
Check if the power cord is plugged into an electrical outlet, if not, plug in. Check
if electricity circuit is connected.
Check if the heater is on HIGH or LOW by con
fi rming switch marked the HIGH or
LOW setting. Check if the heater is on a fi rm, level surface. If the tip-over safety
switch is not pushed in, the heater will not run.