Kero-Sun KRMC-15, Instruction Manual

Page: 5 / 16

5
ENGLISH
ASSEMBLY INSTRUCTIONS
1. Position the heater carefully upside down.
2. Slide the foot support fully into the grooves in the base of the heater nearest to the power cord.
3. Slide the wheel set fully into the groves at the other end of the heater.
4. Turn the heater the right way up.
Positioning of the Heater
The heater should only be operated at a minimum distance of 1 meter from any wall or other
object. Position the air
fl ow in order to optimize the heating of the room.
OPERATING INSTRUCTIONS
NOTE: When switched on for the fi rst time a slight odor may be emitted for a few minutes. This is
harmless and occurs with most appliances as slight traces of dust or lubricants may have collected
during manufacture.
Power Switch I
Power Switch II
Thermostat Control