Kero-Sun KON-09, Instruction Manual

Page: 8 / 20

8
ENGLISH
Operating Instructions
1. Place the product in an upright position on a fl at, steady, stable,
heat-resistant surface. Make sure there is nothing fl ammable or
heat sensitive within 1 meter. Operating the product in any other
position could cause a hazard.
2. Insert the plug into a suitable wall outlet after turning the thermo-
stat knob counter-clockwise to the minimum position and setting
the power switch to “0” for off. The heater is suitable for opera-
tion on an A.C. electricity supply having the same voltage as that
show on its rating label.
3. Turn the power switch from “0” to either “ ● ” (Minimum heating),
or “ ●● ” (Medium heating) or “ ●●● ” (Maximum heating).
4. Turn the thermostat knob clockwise to maximum position. When
the room temperature rises to a comfortable level, slowly turn
thermostat counter-clockwise until the indicator light just goes
out. To adjust the room temperature turn the thermostat clock-
wise to raise the temperature, or counter-clockwise to lower it.
Thus the heater will attempt to keep the room temperature at the
desired level.
5. To turn off the heater, set the power switch to “0” position. The
power indicator light turns off. Unplug the product from the elec-
trical outlet when it is left unattended or is not in use.
Overheat Protection
This heater is protected with overheat protection that switches off
the appliance automatically in case of severe overheating. In this
case, unplug the appliance, wait about 30 minutes for it to cool and
remove any possible cause of overheating, eg. something covering
the heater. Check for damage to the appliance, the cord and the
plug. If there is no damage, plug the unit back in and switch it on as