Kernau KFDW 4641.1 W, User Manual

Page: 38 / 55

EN
38
FITTING THE MACHINE UNDERCOUNTER
If you wish to fit your machine undercounter, check whether you have sufficient space under your
countertop and whether the wiring-plumbing is suitable to do so.1 If you decide that the space under the
countertop is suitable for fitting your machine, remove the worktop as shown in the illustration. 2
Warning : The stand part which we will settle our machine under it by removing its worktop has to be
stable in such a way not to allow balance disorder.
To remove the worktop, remove the screws that hold the worktop which are located at the rear of the
machine; then push the front panel 1 cm from the front side towards the rear and lift it.
Adjust the machine feet according to the slope of the floor.3 Fit your machine by pushing it
undercounter without letting the hoses get crushed or bent.4
Warning : After removal of worktop, the
machine should be placed in such a closed
place of which dimensions are shown at fig.
Product
Without
Insulation
With Insulation
All Product For 2nd Basket For 3rd Basket
Height 820 mm 825 mm 835 mm