Kernau KFD 801 W, Manual

Page: 64 / 170

EN
64
Your dryer is fitted with systems that continuously perform checks during the drying process to
take the necessary measures and warn you in case of any malfunction.
WARNING: If the problem persists even if you have applied the steps in this section, please
contact the your dealer or an Authorised Service Provider. Never try to repair a nonfunctional
product.
PROBLEM REASON SOLUTION
The drying process takes a
long time.
The surface of the lint filter might be
clogged.
Wash the filter with lukewarm water.
The heat exchanger might be
clogged.
Wash the heat exchanger
The ventilation grills in front of the
machine might be closed.
Open the doors/windows to prevent
the room temperature from rising too
much.
There might be a layer of limescale
on the humidity sensor.
Clean the humidity sensor.
The dryer might be overloaded with
laundry.
Do not overload the dryer.
The laundry might be insufficiently
spun.
Select a higher spin speed on your
washing machine.
Laundry comes out damp
at the end of the drying
process.
The laundry that comes out hot at the end of the drying process
generally feels more humid.
The programme used might not be
suitable for the type of laundry.
Check the care labels on the laundry
items, select a suitable programme for
the type of laundry and additionally,
use the time programmes.
The surface of the lint filter might be
clogged.
Wash the filter with lukewarm water.
The heat exchanger might be
clogged.
Wash the heat exchanger
The dryer might be overloaded with
laundry.
Do not overload the dryer.
The laundry might be insufficiently
spun.
Select a higher spin speed on your
washing machine.
The dryer cannot be
opened or the programme
cannot be started. The
dryer does not get activated
when adjusted.
The dryer might not be plugged in. Make sure that the plug is fitted in the
socket.
The loading door might be open.
Make sure that the loading door is
properly closed.
You might not have set a programme
or pressed the Start/Pause key.
Make sure that the programme has
been set and the dryer is not in the
Standby (Pause) mode.
Child lock might be active. Deactivate the child lock.
7. TROUBLESHOOTING