Kernau KFC 90093.1 GE CI X, Operation Manual, Page: 32 / 100

EN
32
• It is recommended to connect the cooker into the gas supply system with metal
flexible gas pipe, which meets the requirenments to current national regulations.
• In case of use the metal flexible gas pipe it should be sealed with the seal or the
teflon tape, it connection with the cooker pipe.
• The cooker connection to a gas cylinder should be conducted with a flexible
hose in the 6-8 mm in diameter, that meets the national regulations, and via the
appropriate connector. The gas cylinder should be equipped with the regulator of
gas pressure, that meets the national, techniacal regulations.
• The gas cooker can be direclty connected (without the connector) with the main
gas valve of gas supply system via metal flexible hose in the 15mm in diameter. It
should be noted the expiry date of the flexible hose provided by the producer. After
this period has expired, for safety reasons, it must be unconditionally replaced.
The maximum cable lenght is 125cm.
• AFTER THE INSTALLATION PLEASE CHECK THERE IS NO
LEAKAGES ON THE CONNECTIONS.
• After the placing the cooker in the destination point, it should be leveled via spirit
level. The regulation is conducted with rotating the cooker feets.
• The cleaning and maintenance should be not conducted by children without the
supervision.
• This appliance can be used by childern over 8 years old and persons with limited
physical, sensory and mental abilities or lack of knowlage and experience in
usage this appliance when thy are under the superviosn or been informed about
proper usage of this appliance, by the responsible person for their safety, and they
undestand the risk of danger.
• THE METAL FLEXIBLE GAS HOSE AND THE ELECTRICAL
CABLE CAN NOT TOUCH IN ANY POINT WITH THE HEATER
ELEMENTS OF THE COOKER, ESPECIALLY WITH THE REAR
WALL OF COOKER.