Kernau KDI 6754, User Manual

Page: 57 / 124

57
Infoled 2.1 (Model Dependent)
LED Indicator State of the Machine
Red, continuous The machine is running a program
Red, flashing A program is cancelled
Red, flashing rapidly
The machine has a fault. Refer to section
„Automatic fault warnings and what to do”.
Green, continuous A program is finished.
CHAPTER 8. CLEANING AND MAINTENANCE
Cleaning your dishwasher is important to maintain the machine’s service life Make sure that the water
softening setting (If available) is done correctly and correct amount of detergent is used to prevent limescale
accumulation. Refill the salt compartment when the salt sensor light comes on.Oil and limescale may build
up in your Dishwasher over time. If this occurs:
• Fill the detergent compartment but do not load any dishes. Select a programme which runs
at high temperature and run the Dishwasher empty. If this does not clean your Dishwasher
sufficiently, use a cleaning agent designed for use with dishwashers.
• To extend the life of your dishwasher, clean the appliance regularly on each month
• Wipe the door seals regularly with a damp cloth to remove any accumulated residue or foreign
objects.
FILTERS
Clean the filters and spray arms at least once a week. If any food waste remains or foreign objects on the
coarse and fine filters, remove them and clean them thoroughly with water.
a) Micro Filter
b) Coarse Filter
c) Metal Filter
NOTE
If user do not deactivate Crystalight function at the end of program, it will remain active until
the machine turns off.
NOTE
If Crystalight or Ionizer function is active, ionizer led lights up like dimming during door is
open.