Kernau KDI 6543, User Manual

Page: 39 / 108

EN 39
TEST STRIP
The washing efficiency of the device depends on the softness of the water supplied. In this case the device
is equipped with system, which decreases the water hardness supplied from the water supply network. If
this system is correctly setted, the washing efficieny will be higher. To get to know the water hardness level
supplied to the house, please contact with the water supply company or determine the water hardness level
with the test strip (if is available).
1. Open the test strip.
2. Run water through the tap (1min.)
3. Keep the strip in the water (1sec)
4. Shake the strip.
5. Wait (1min.)
6. Set the hardness level of your machine.
WATER HARDNESS TABLE
1
2
3
4
5
6
LEVEL GERMAN DH FRENCH DF BRITISH DE INDICATOR
1 0-5 0-9 0-6
The display will
show “1” then “L”.
2 6-11 10-20 7-14
The display will
show “2” then “L”.
3 12-17 21-30 15-21
The display will
show “3” then “L”,
4 18-22 31-40 22-28
The display will
show “4” then “L”.
5 23-31 41-55 29-39
The display will
show “5” then “L”.
6 32-50 56-90 40-63
The display will
show “6” then “L”.
• Open the door of the machine.
• Turn on the machine, and press the Programme button as soon as the machine is turned on.
• Hold down the Programme button until “SL” disappears.
• The machine will display the last setting.
• Set the level by pressing the Programme button.
• Turn off the machine to save the setting..
WATER SOFTENER SETTING:
The dishwasher is equipped with a water softener which reduces the hardness in the mains water supply. To
find out the hardness level of your tap water, contact your water company or use a test strip (if available).
NOTE : The level is set to 3 as default. If the water is
well water or has a hardness level above 90 dF, we
recommend that you use filter and refinement devices.