Kernau KDI 4654, User Manual

Page: 42 / 108

EN 42
For best results, follow these loading guidelines.
Loading the household dishwasher up to the capacity indicated by the manufacturer will contribute to energy
and water savings.
Manual pre-rinsing of tableware items leads to increased water and energy consumption and is not
recommended You can place cups, glasses, stemware, small plates, bowls, etc. in upper basket. Do not lean
long glasses against one another or they cannot remain steady and may receive damage.
When placing long stem glasses and goblets, lean them against the basket edge or rack and not against other
items.
Place all containers such as cups, glasses and pots into the dishwasher with the opening facing downwards
otherwise water can collect on items.
If there is cutlery basket in machine, you are recommended to use the cutlery grid in order to obtain the best
result. Place all large (pots, pans, lids, plates, bowls etc.) and very dirty items in the lower rack.
Dishes and cutlery should not be placed above each other.
WARNING:
T ake care not to obstruct the rotation of spray arms .
WARNING:
CHAPTER 5. LOADING YOUR DISHWASHER
WARNING:
Make sure after loading the dishes do not prevent opening the detergent dispenser.
RECOMMENDATIONS
Remove any coarse residue on dishes before placing the dishes in the machine. Start the machine with full
load.
Do not overload the drawers or place dishes in the wrong basket.
To avoid any possible injuries, place long-handle and sharp-pointed knives with their sharp points facing
down or horizontally on the baskets.
Dish rack
There Dish rackare dish racks on the upper basket of your machine.
(
a) (b) You can use these dish racks in open or closed position.
When they are in open position (a) you can place your cups on
them; and when in closed position
(b)
you can place long glasses on
the basket. Also, you can use these racks by placing long forks,
knives and spoons on them laterally.
a
b