Kernau KCH 5560 B AUTOMATIC, Instruction Manual, Page: 25 / 51

EN
25
Installation
If you have an outlet to the outside, your cooker hood can be connected
as below picture by means of an extraction duct (enamel, aluminum,
flexible pipe or non-flammable material with an interior diameter of
150mm).
1. Before installation, turn the unit off and unplug it from the
outlet.
2. The cooker hood should be placed at a distance of 65~75cm above the
cooking surface for best effect.
3. Install the inside chimney bracket by screws and wall
plugs at a suitable place once the installation height
is fixed, and keep it in line, see Pic 2. The installation
position of the inside chimney bracket is the highest
position of the inside chimney.
4. Install the cooker hood body onto the wall by screws and wall plugs, see Pic 2
and Pic 5.
5. Fix the expansion pipe onto the cooker hood, see Pic 3.
6. Install the outside chimney bracket on the outside chimney, make sure that the inside
chimney could be moved inside, see Pic 4.
7. Adjusting the cooker hood position, fix the cooker hood with screws (safety screw).
NOTE:
The two safety vents are positioned on the back housing, with diameter of 6 mm. See
Pic 5.