Kernau KCH 1261 X, Manual Instruction, Page: 19 / 36

CAUTION !
The device is wrapped in foil, which may cause a danger situation. To avoid the risk of
an accident, keep the foil away from childern. Also do not allow children to play nearby
or use the hood.
PURPOSE AND TYPE OF WORK
This hood is intended to work in suction mode witch the dischrage the vapors to the
outside or to work in filtering mode with internal recirculation, closed circuit.
POWER CONNECTION
The mains voltage should comply with the conditions specified on the rating plate
located inside the hood. If the hood is equipped with plug, it should be placed in a socket that
meets the reqirements of applicable regulations and located in easily accessible place. If the
hood is not equipped with plug, instalation of the hood entrust to the qualificated technician.
CAUTION!
Before reconnection the hood circiut to the power supply and checking if works correctly,
should always make sure if the cord is properly mounted. The hood is equipped with special
power cord. In case of damage this power cord, please order it in service center.
HOOD INSTALATION
The minimum distance between the surface on which the dishes on the heating device
are located and the lowest part of the kitchen hood should be not less than 45cm in the case of
electric cookers and not less than 65cm in the case of gas or electric-gas cookres. If the heating
appliance manual instruction indicates a grater insteallation distance for the kitchen hood,
please follow these indications.
EN
19