Kernau KCH 1161 B, Instruction Manual, Page: 34 / 55

EN
34
• Turn the carbon filter on both side of the motor anti-clockwise. Replace the carbon
filters with the new carbon filters.
• Place the mesh filter.
• Connect the power supply to the wall socket.
NOTE:
Make sure the filter is securely locked. Otherwise, it would loosen and cause dangerous.
When activated carbon filter attached, the suction power will be lowered.
Bulb replacement
• The bulb must be replaced by the manufacturer, its service agent or similarly
qualified persons.
• Always switch off the electricity supply before carrying out any operations on the
appliance. When handling bulb, make sure it is completely cool down before any
direct contact to hands.
• When handling globes hold with a cloth or gloves to ensure perspiration does not
come in contact with the globe as this can reduce the life of the globe.
NOTE:
Before changing the lights, make sure that the appliance is plugged off.
Protect against danger when changing lights, such as wearing gloves.
Changing the lights:
• Switch the unit off and unplug it from the main power supply.
• Open the glass door and take out the aluminium filter.
• Pull out the LED light carefully and replace with the same type and rated light.
ILCOS D code for this lamp is: DSS-1.5/65-S-120/33
- Max wattage: 2×1.5 W
- Voltage range: DC 12V
- Dimensions: 120mm x 33mm