Kernau KBO 1066 PT X, Operation Manual

Page: 51 / 54

EN 51
REPLACING OVEN LIGHT BULB
To avoid the possibility of an electric shock, the appliance must be
turned off beforehand.
• Rotate all knobs into 0 positions to turn the oven off.
• Unscrew and clean the lamp cover – wipe it clean before
replacing it.
• Unscrew the light bulb. If necessary, re-place it with
proper light bulb, with parameters as below:
- voltage 230 V
- power 25 W
- E14 head
- temperature resistance 300
o
C
• Screw the new light bulb into place.
• Screw the cover into place.
Oven ilumination
REMOVING THE DOOR
To make cleaning easier, you can remove the door. To do this, please open oven door, lift security tabs in both
hinges (Pic. A). Then, close the door a bit, lift them and remove from the frame. To mount the door, follow the
instructions in reverse order.When placing oven door back, make sure that cuts on the hinge match to the socket.
Afterwards, lock the security tabs in both hinges and push them into place. Inappropriate mounting of
the door may break them when closing.
REMOVING AN INNER GLASS
1. 1. Please pry the top grill of the door off with a flat-
tipped screwdriver.
2. Remove the top grill.
3. Remove internal glass from its housing.
WARNING:
Danger of cracking! Inner glass should be sled out, not lifted.
A
Lifting the hinge security tags