Kernau KBH 07603 X, Manual Instruction

Page: 20 / 47

20
OPERATION CONDITION
•
Carefully read the operating instructions, which provide accurate information regarding
installation, use and care of the device.
•
When installing the device, comply with the conditions and guidelines contained in
these instructions for use.
•
The manufacturer declines all responsibility for damages resulting from the installation
inconsistent with the information given in this manual.
•
The hood may differ in appearance from the hood shown in the drawings of this manual,
but the recommendations for operation, maintenance and assembly remain unchanged.
•
The device is intended for home use. The warranty conditions change when used for the
catering business.
•
Keep the operating instructions in order to be able to use them at any time. If you sell
the device or move out form your residency, make sure that the operating instructions
are included with appliance.
•
Do not make any electrical or mechanical changes to the device or the drain lines.
•
Do not pull the plug out of the socket by pulling the cord.
•
The power cord must not touch a hot surface.
•
Do not operate the device if the power cord is damaged.
•
Any changes made to the construction of the hood by persons without the appropriate
permissions result in exclusion of the manufacturer's liability for the product.
•
The hood should never be used as a support surface, unless such possibility has been
clearly indicated.
•
The kitchen hood is used to remove kitchen vapours outside, it should be connected to
adequate ventilation duct (do not connect it to chimney, smoke, flue ducts in use).
•
If, in addition to the hood, other non-electric devices are used in the room (e.g. liquid
fuel stoves, flow heaters, thermostats), sufficient ventilation should be ensured.
•
Unplug the appliance from the socket before each cleaning operation, filter change or
before carrying out any repair work.