5.3 Line feed
Press the „LF“ button in standby mode (“SEL” display off); this makes the line feed
start without data being printed. To stop the line feed, again press the „LF“ button.
5.4 Start-up
The printer will be ready for operation immediately after it has been connected to
the power supply; the LED “P” will light up.
5.5 Paper
Inserting the paper
Tearing off paper
Do not pull printout upwards.
⇒
Fold over one end of the paper before
inserting it into the printer
⇒
Insert the folded-over end of the paper
into the mechanism
⇒
Turning on the printer supply
⇒
Press and hold the „LF“ key until the
paper emerges from the outlet slot of
the mechanism
⇒
Pull the printout across the direction of printout that
it rests on the cutter bar of the printer housing
YKN-01-BA-e-1411
7
