ALJ/ALS/PLJ/PLS-BA-e-1640
36
8 Basic Operation
Start-up
In stand-by mode (see chap. 6.5) press ON/OFF button.
The balance is ready for weighing when the weight display appears.
For models PLJ-M
“Wait 30“ appears on the display. The weighing
balance requires 30 minutes to reach stabilisation. Afterwards it will
automatically change into weighing mode at which point it will be
ready for operation.
Switching Off
Press ON/OFF button, the balance returns to the stand-by mode
(see chap. 6.5).
Simple weighing
Place goods to be weighed on balance
Wait until the stability display appears [
]
Read weighing result.
Taring
Place the weighing box and press the
TARE
button.
„0-t“ is displayed.
After standstill control the zero display appears.
The weight of the container is now internally saved.
Weigh the material, the net weight will be indicated.
The weight of the weighing container will be displayed as a
minus number after removing the weighing container.
The tare weight is saved until it is deleted. Remove the load from
the balance and press the
TARE
button. „0-t“ is displayed, wait
until the zero display appears.
The tare procedure can be repeated as many times as
necessary, for example with initial weighing of several
components for a mix (add-on weighing). The limit is reached
when the total weighing range capacity is full.
.
