KERN OLM 171, User Instructions

Page: 12 / 27

11 OLM-1-BA-e-1610
4.1 Reflected light unit
At first you have to unite the lamp housing [1] and the reflected light unit on their
connection points. After that the connection has to be fixated by two Allen screws,
which are attached to the connection point [2]. When doing this, you should always
make sure that you do not touch the lenses with your bare fingers and that no dust
enters the apertures.
Afterwards you must establish the electrical connection between the lamp housing
and the integrated power supply unit of the microscope. The plug of the connection
cable [3] has to be installed to the according socket on the rear of the microscope
housing. Please do also use the screw lock on the plug.
Now the slides for analyser, polariser and colour filter can be attached to the
appropriate slots.
Refer to page 7:
Analyser slide / b ears the inscription
„A“
: 21)
Polariser slide / b ears the inscription
„P“
: 20)
Colour filter slide / the supplied blue filter needs to be previously inserted : 5)