5.2 Unpacking
Remove the reader carefully from the packaging, take off the plastic sleeve and put
the transponder card reader together with the balance in the designated space or
attach it to the wall.
(installation of the balance according to the operating instructions of the balance)
5.2.1 Scope of delivery
Serial accessories:
•
Transponder card reader
•
Connecting cable to balance
•
Operating manual
5.3 Electric Supply
Power is supplied via the connected balance.
5.4 Connection to the balance
Disconnect the balance from the mains before connecting the transponder card
reader or disconnecting the transponder card reader to or from the balance.
This transponder card reader is exclusively suitable for the connection to KERN
balances.
5.5 Initial Commissioning
Plug the enclosed connecting cable into the I/O terminal on the balance.
Power is supplied via the balance. The transponder card reader does not have
a power supply unit.
Switch on balance
The balance will launch a self-test and afterwards change to “0.0“ display.
The LED under the
- symbol on the transponder card reader will be lit up
red.
The transponder card reader is now ready for operation.
6
KET-A05-BA-e-1511
