ILT-BA-e-0612
48
Press
-key; the display changes into parts counting
operation
The balance is now in parts counting mode counting all
units on the weighing plate
01 Reference weight determination of reference weight through weighing
Press
-key; display changes to counting mode
Parts counting setup
M1
01 Un it weight
02 Recall sam ple
03 Store sa mp le
04 Ch eckweighting
05 Fillin g
06
07 Ru n
Statistics
5.0000 g
OF F
OF F
OF F
Press the
-key; select reference quantity (factory-
defined are quantities of
10, 20, 50,100, or freely
selectable) with the arrow keys,
use the
-key to confirm
Place as many counting parts on the weighing plate as
the set reference quantity requires, confirm by pressing
the
-key. If you are using a weighing container first
tare your balance pressing the
key.
Press
-button
The symbol (
) in the display indicates that automatic
reference optimization is switched on. Every time more
pieces are added the balance carries out optimization
automatically. It is not necessary to press another key to
start the optimization process. For each reference
optimization the average piece weight (reference) is
newly calculated. As the additional pieces increase the
base for the calculation, the reference also becomes
more exact.
Operate the
-key. The reference quantity is saved
under "
01 Unit weight
".
Press the
-key; the balance is now in parts counting
mode counting all units on the weighing plate.
