7.10 Automatic adding-up
This function is used to add the individual weighing values automatically into the
summation memory and to provide a printout via the installed printer.
To set this function, see chap. 8.2 „AU on“
Place material to be weighed A
After stabilisation display has taken place, you will hear an
audio sound.
The symbol for „AUTO“ appears.
The weighing value will be saved to the summation memory.
(example)
Remove material to be weighed A
„ACC 1“followed by the weight value will be displayed shortly
and printed.
Afterwards the weighing scales change to zero display.
Place material to be weighed B
After stabilisation display has taken place, you will hear an
audio sound.
The weighing value will be saved to the summation memory.
Remove material to be weighed B
„ACC 2“followed by the total weight of both weighings will be
displayed shortly.
The weight of the items to be weighed B will be printed.
After that the balance changes to the zero display.
Add more material to be weighed as described before.
Please note that the balance must be unloaded between
the individual weighing procedures.
You can repeat this process until the capacity of the scales
is exhausted.
30
GAB-P-BA-e-1411
