•
Back to weighing mode
by
pressing the
MODE
button.
•
Error message „Er 1“
Piece below minimum weight of piece (See chpt. 1
“Technical specifications“): Press
MODE
key and restart
reference determination.
•
Taring
The tare vessels can also be used for piece counting. Before
starting piece counting use the
TARE
button to tare out the container.
Net-total
weighings
It is useful if a mixture of several components is weighed into a
tare vessel and finally the sum weight of all weighed
components is necessary for control purposes (net-total, i.e.
the weight of the tare vessel).
Example:
1. Place tare container on the weighing plate. Press the
TARE
button, the zero display disappears.
2. Weigh-in component
n
. Press the
SET
button, the zero
display disappears. [
c
] is displayed on the right border of
the display.
3. Weigh-in component
o
and press
SET
key. Net-total (sum
weight of the components
n
and
o
) is displayed.
4. Press the
SET
button, the zero display disappears.
5. Weigh-in component
p
and press
SET
key. Net-total (sum
weight of the components
n
and
o
and
p
.) is displayed.
Ö
If necessary, also fill the formula up to the desired final
value. For every component more repeat the steps 4-5.
Ö
Back to weighing mode by pressing the
TARE
button.
17
EMS-BA-e-1112
